There’s no car owner who would not want to protect their car seats from wear and tear, stains and dirt. Therefore, to have a clean and classy car interior, you should use covers. The comfort of the car seat, not only lies in the spongy effect, but also the material used to cover the sponge and cushion. The most common seat covers include cloths and leather covers. However, one of the best seat cover material is neoprene.
Neoprene seat covers are common these days because the material proves the quality through various advantages. The neoprene material allows excellent elasticity and flexibility for the passengers to sit and relax. Travelling in the seat covered by neoprene provides incredible comfort, and there is no pain or fatigue even when you are going for a long trip.
Knowing how to fit neoprene seat covers is essential because, without proper installation, you cannot experience the promised comfort during the travel. If a proper installation is not done the length of the life of the seat cover reduces. The following are steps to follow during neoprene seat cover installation:
Get the Headrests
First and foremost, look for the headrest in the
seat, since you have to detach it so that you can easily fit the cover to the car seat. In most cars, the headrest is removable, but it depends upon the brand you are using. There are tabs near the legs of the headrest that you press or use as an open type button to remove the headrest. In other cases, the headrest has pinholes to detach or both a pinhole and a tab.
Installing the Seat Cover to the Seat
Start fixing the cover to the seat from the head. If the armrest is in the seat press it upwards as you do the installation. Pull the seat cover upwards before fitting so that you can easily cover the seat gradually.
Unroll the Seat Cover
As you start from the head unroll the seat cover down until it reaches the bottom. Push the bottom flap of the car seat cover to open between the seat back and the bottom. If the seats are foldable, better fold it as you can easily install the seat cover.
Start With the Bottom Seat Cover
Begin with the bottom seat cover, push the cover
from the front side of the base to cover the bottom and clip beneath the seat using buckles. With the side hooks in the seat cover, attach it or clip it to the clasps so that the cover stays fit and not loose.
After completing the installation, reinstall the headrests. As you reinstall the headrests, make sure to stretch the seat cover properly.